It looks like an erector set and it s just as versatile.We’ve worked major overtime coming up with this new item, a whole body rigid restraint system. This Baby will let you set up your Dungeon with just one piece. Its uses are limited only to your imagination.
The best of all worlds: We have taken the best of spreader bars, stockades, fiddles, impalers, and scavenger’s daughter to combine them into a highly versatile erector set. Combinations limited only by your imagination
The basic set starts two spreader bars (same as our spreader bars without rings) sizes 12 and 18 inches. Versatile by themselves, we made an “H” frame that is adjustable long ways for a flat on the floor stock system. There is a collar holder included for a basic 5 piece full body restraint system. This one is for the folks that already have a set of Detached shackles, or for people who still like leather You can attach shackles to the spreader bars with locks, tie them or depending on your shackle set, you might be able to bolt them together.
THE BASIC "H" $169.00
· The wrist bar is a “T” bar made with ¾” square steel.
· The ankle bar is also a “T” bar but made from larger 1” square tubing.
· The spreader bars will slide through the short part of the “T” by rotating them slightly.
· For starters put the 12 inch spreader in the wrist bar and the 18 inch in the ankle bar. Center them and secure with included Allen wrench.
· The collar holder base looks like an “L” slide the bottom of the “L” onto the wrist bar (the 3/4” one)
· If you have the chest rest, it slides onto the wrist bar same as the collar holder, they will both go either direction, you choose what is best for your spacing needs.
· The wrist bar (3/4) then slides into the ankle bar (1”). Adjust to taste and secure with Allen Wrench.
· The collar holder is an 8” piece of ¾ round tubing. It slides into the top of the “L” and is secured with the Allen wrench.
· Attach shackles with locks, or bolts, depending of your desired level of rigidity.
It comes in a clear finish over steel. This leaves the original welding marks in the steel for an industrial harsh look and powder coat prevents rust. For a smooth metalic finish go with the silver. It is shown just to the right of the clear in the picture below. Black is also a popular color. We make it in all of our colors, just be aware that the set screws will put little dents in the powder coat and leave marks, may be a small price for excellent bling.
Translucent red, starlight purple, clear over polished steel, silver metalic, starlight bule and starlight red shown.
We have had some feedback on stocks: after a while the slave gets tired… boo hoo. But some of our masters like to keep their slaves comfy so they can serve their masters longer. We made a padded chest rest. It comes on the same mount system as the collar, adjustable front to rear and height adjustable. It can also be used as a chin or head rest, (buy two). Ercstrst .
We made a set of shackles just for this piece. 1” wide by 3/16” thick shackles with a longer full chain link welded to the side, no ring to get in the way and the shackles will easily bolt to the spreader bars with 3/8” by 1” bolts (included) for a sturdy rigid set. They still use the small ¾” locks, not included.
A Delightful accessory. On the adjustable bar that holds the spreader bar for the ankles, we used a longer set screw so the threads stick up just enough to allow us to thread a fully adjustable dildo holder onto the back, you take it from there.
Let’s get to it, you want it all. The Erector set complete includes the basic ”H” with 2 spreader bars: 12 and 18 inch , the chest pad, a five piece shackle set, and the dildo holder. All for $399.00
ERfull set $399.00
It comes in a clear finish over polished steel. We make it in all of our colors, just be aware that the set screws will put little dents in the powder coat and leave marks, may be a small price for excellent bling.
I sent a sample of our new set to Angel to try out and tell what she thinks: She loved it she also told me that this thing will work as a back stock. That is when I started to look at the versatility of the basic design and came up with the accessory kit.
The kit includes a ¾” square bar with threads in both ends, a dildo holder adaptor, a threaded ring and link, and a cross mount adaptor to hold a spreader bar where the neck support usually sits just a few pieces that make the set infinitely expandable.
ACCESSORY KIT INCLUDING 3 more spreader bars $99.00 ERAccessory
The basic "H" comes with spreader bars in 12 and 18 inches, We will add the 6, 24 and 30 inch bars for even more combinations for fun.
OK nice pieces, but what the F*** do we do with them:
Take the ankle bar with the 18 inch spreader bar in it, remove the wrist bar and insert the ¾” square bar with threads on both ends. Screw in the dildo adaptor and you have an impaler. Spreader bars are interchangeable so you can go with any width
Remove the dildo holder, slide the accessory cross piece onto the ¾” bar which holds a spreader bar, use the 12 inch, smaller ones are available. And screw the threaded link into the end of the ¾” bar. This now attaches to a collar for a 5 way upright front or back stockade.
Use the ¾” wrist bar for ankles, slide the cross piece on to hold wrists and screw the threaded link into the top to hold the collar. We now have a scavenger’s daughter.
Use the ¾” bar with threads on both ends: Slide the cross piece on for wrist, the threaded link in one end for a collar and the threaded ring in the other end to tether or lead around your slave. You now have a fully adjustable fiddle
Well… you get the idea, we are very happy with the versatility of this item, after you play with it let us know what you come up with. Have fun.
